Audio Interface With Multiple Headphone Outputs - AUGAO
Skip to content Skip to sidebar Skip to footer

Audio Interface With Multiple Headphone Outputs

Audio Interface With Multiple Headphone Outputs. Same for the behringer unit i suggested. Then they effectively become one larger interface with their inputs and outputs pooled.

Audient iD14 (MKII) 10in/6out HighPerformance USB 3.0 Audio Interface
Audient iD14 (MKII) 10in/6out HighPerformance USB 3.0 Audio Interface from www.amazon.in

View all of the audio interfaces that are tested & approved to work with playback. If your interface has a left and right output, you might be able to mono the output from your daw and plug a set of headphones into each by using a mono 1/4” to stereo 1/8” adapter. Maximum gain = 14/(v rms of balanced output)

Similar To The Spdif, It Is A Reliable Way Of Transferring Signals And Is Able To Carry 2 Uncompressed Or Compressed Signals (In.


In addition to the normal left/right channel output stereo, there is. The headphone amp would be an accessory to your audio interface, not an alternative. I used it to give me a choice of two types of headphones without needing to switch cables, or share with someone.

If You Are Looking For Other Valuable Gear Recommendations Check Out Our Consolidated List Of Everything You Might Need:


Hi, i am using audition 2014.0.1, nd am trying to play audio on multiple output devices simultaneously. Same for the behringer unit i suggested. Trrs stereo plug male to 3 x 1/8 3.5mm stereo jack female 1 input 3 output stereo audio aux splitter cable(1m/3f) 4.5 out of 5 stars 492.

Maximum Gain = 14/(V Rms Of Balanced Output)


Enable and use stereo mix. You can use more than one microphone at a time (usb mics allow only one mic to connect) the headphone output in a usb interface will sound better and louder than the headphone out of a usb mic or laptop ‘phone jack; Connect headphones to audio interface

It Takes A Single Headphone Signal And Splits It Into Several Different Headphone Outputs.


If your interface has a left and right output, you might be able to mono the output from your daw and plug a set of headphones into each by using a mono 1/4” to stereo 1/8” adapter. Focusrite scarlett 18i8 | sweetwater.com. This provides great flexibility for routing audio between different applications without requiring extra cables, making it ideal for streamers and musicians alike.

[Double Output Ports] The Linear Mixer Is Compatible With Multiple Output Modes, And Two Output Ports Are Set.


I did a little more searching, surprised no one mentioned this interface: Production duos or full bands will want to find interfaces with additional headphone outputs for multiple performers (or you can buy an additional headphone. Iconnectivity, focusrite, presonus, apogee, behringer, and more.

Post a Comment for "Audio Interface With Multiple Headphone Outputs"